杭州必優企業管理有限公司
HangZhou Beyou Enterprise Management Consulting Co.,Ltd
聯系方式
ABUIABACGAAggrviogUokPOquwUwsgE4sgE!100x100

聯系電話:15224045885

聯系人:王先禮

QQ:47356787  微信:BEYOU888

郵箱:xl482@sina.com

地址:杭州市余杭區南苑街道新康家園-西區53號

FCCA質量體系審核綱要(四)中英對照

分享到:

4.0 Process and Production Control過程和生產控制
4.0.1 Does factory have work area only for Product Development?
工廠是否有產品開發工作區?
4.0.2 Does factory PD study and apply product safety features,
evaluates patterns, moulds and samples during product design and
development? 在產品設計和開發工廠產品開發的研究與應用是否有產品安全功能、評估模式、模具和樣品?
4.0.3 Does Product development includes packaging design and tests
that conforms to industry standard (ISTA)
產品開發包括包裝設計和測試以確保符合行業標準(ISTA)。
4.0.4 Does factory PD perform assembly time-study on product and
develop easy ways to use for consumer benefit?
工廠產品開發在產品執行組裝時間研究,產品開發和簡便的方法使用的消費者受益呢?
4.0.5 Factory has documented Production procedures at each stage of
operation. 工廠有每一個階段的運作生產程序文件。
4.0.6 Factory has documented Quality procedures at each stage of
operation. 工廠有每一個階段的運作質量程序文件。
4.0.7 Does factory conduct Pre-production meeting prior to start of
production?工廠是否實施進行生產前的預產會議?
4.0.8 Are production and quality supervisors present during
Pre-production meeting?目前在預產會議有生產和質量主管?
4.0.9 (Critical) Are critical quality and safety checks reviewed,
identified, and actions for improvement documented during
Pre-production meeting? (重要)是至關重要的質量和安全檢查、審查,確定,并采取行動加以改進記錄在預產會議?
4.0.10 Does factory conduct “pilot-run”, review product quality
against specification sheet and document results with corrective
actions prior to production?工廠是否進行“試運行”,檢討對產品質量的規格表和文件在糾正行動之前生產?
4.0.11 Is quality of item acceptable on current production? (Check
3 or 4 completed products from production floor).
質量是可以接受的項目就目前的生產呢?(從生產區檢查3或4個成品)。
4.0.12 Was in house lab-testing performed on current production?
(Request for test copies)內部實驗室測試是否實施當前生產測試?(要求測試的副本)
4.0.13 Does factory QC compare first piece samples with approval
sample and specification sheet? 工廠QC是否比較首件樣品抽樣檢驗和批準的規格表?
4.0.14 Are there adequate approved samples, first piece samples,
reference samples and work instructions to provide workers with
proper guidelines? 是否有足夠的核準樣品、首件樣品、參考樣品和為工人提供適當的作業指導書?
4.0.15 Does factory use defective/ reject samples to demonstrate
examples of common defects?
工廠使用有缺陷的/不合格樣品是否普遍例子?
4.0.16 (Critical) Does Quality Control have authority to stop
production if quality of products did not meet specification?
(重要)如果產品質量不符合規格質量控制是否有權停止生產?
4.0.17 In-line inspections (IPQC) are performed by QC at every
operation process. 在巡檢(IPQC)所執行品管在每一個操作過程。
4.0.18 Does factory use statistical process control (SPC for
quality)?工廠使用統計過程控制?(質量統計分析)
4.0.19 Factory QC inspects per standard AQL or as per industry
standards.工廠品管檢驗按照標準AQL或按照工業標準.
4.0.20 Factory performs 100% functionality check on final
products?工廠最終產品實施100%功能性確認?
4.0.21 Does factory use corrective actions and root cause analysis
methods? (Please provide examples)工廠是否使用的糾正措施和根本原因分析方法呢?(請提供例子)
4.0.22 Does factory have guidelines in place to ensure packaging is
correct for product? 工廠是否有指南以適當確保包裝是正確的產品?
4.0.23 Does packing area have enough space to perform packing
functions properly? Is it clean and organized?
包裝區是否有足夠的空間用來履行包裝職能?它是清潔和有組織的?
4.0.24 Packed cartons are stored in enclosed area not exposed to
sunshine and wet weather. 包裝紙箱都儲存在封閉區域內沒有暴露于陽光和潮濕天氣。
4.0.25 Does factory track and document on-time ship
performance?工廠是否有跟蹤和文件準時出貨職能?

4.1 Suppliers and Sub-contractors供應商和分包商
4.1.1 Does factory have a documented supplier selection and
approval process?工廠是否有供應商選擇和批準過程文件?
4.1.2 Does factory track, evaluate and document material’s supplier
reliability (performance)?工廠是否跟蹤、評價和文件物料供應商的可靠性(效能) ?
4.1.3 Does factory have an established, documented quality
procedure and does factory evaluate, monitor sub-contractor quality
performance and reliability? 工廠是否有建立質量記錄的程序和工廠評估、監測分包商的質量性能和可靠性呢?

捕鱼大师官方网站 ipad在线棋牌游戏 河北20选5最新开奖结果 pdt理财官网 体育彩票走势图表怎样看 云南快乐10分开奖号 3d红五历史记录 广东快乐十分走势图 福彩组六全奇多少注 ag亚游比特币平台 湖北11选5推荐 麻将游戏哪个好 足彩比分直播胜负彩 中国体育彩票官方网站 4399上海麻将连连看 舟山体彩飞鱼开奖